Capacity Top of Steel: 17 cu/yd

Capacity Top of White Oak: 19.9 cu/yd

Net Weight: 9500 lbs. / 4318 kg

Under Body Apron Conveyor:
• 26” wide pintle chain assembly
• 330 PIW belting mechanically fastened to cross slats
• 22” Effective belt exposure between skirting
• Engineered to carry full capacity in transit
• Variable speed hydraulic/planetary gear box drive

High Speed Boom Conveyor:
• 14” x 19’ c/w 35° troughed idlers
• Endless hot vulcanized chevron belt
• Rubber-clad drive roll
• Variable speed (0-3700 ft/min) hydraulic motor drive
• Full hydraulic lift, swing and rotate
• Left or right conveyor parking for travel

Control Systems:
Full manual valve control from an elevated work station, with 3 function boom maneuverability at ground level.
Full manual valve control from an elevated work station, with full controls at ground level.
Hetronic™ BMSII Proportional Radio Remote Control of all functions including engine throttle.

Basic Body Dimension:
Body 8’ 6” x (16', 18’ or 20’) x 6’-7 1⁄2” High plus 6” White Oak box extensions, plus 12” arched tarp system for an 8’-1 1⁄2”overall height on the chassis

Overall Length With Conveyor Parked on Fender: 22’ 6”

Recommended Chassis:
• Heavy construction chassis
• 20,000 lb. front / 46,000 lb. rears
• Consult distributor and truck dealer for specifications and auxiliary axle requirements specific to your state or provincial regulations

Cab to Axle Requirement: 156” - 188”
Dependent on state or provincial regulations.

Pump / P.T.O.:
Tandem, Cast Iron, 3000 psi Bushing Bearing Gear Pump direct mount to air shift power take off.

Oil Cooler:
2 - High Efficiency, Light Weight, 12VDC, Thermostat-Controlled Dual Fan Air-Oil Heat Exchangers.

Super-Shield™:
• Standard Hydraulic “Power Drive”
• Optional Second Friction Drive

Standard Features:
• 1⁄4” Grey HMW Polyliner
• Electronic Engine Throttle Control
• Hydraulic Vibrator
• Manually Operated Arched Mesh Tarp System
• Lighting
• Fenders
• Mud Flaps

Options:
• Dual Location Control (Manual Valves)
• 12VDC Power Tarp Drive System
• 18” Arched Tarp
• Vinyl Tarp vs. Mesh (12” or 18”)
• Aero 575 12VDC Powered Flip Mesh Tarp System
• Custom Color Paint (Non-Metallic)
• LED Lighting Package
• Pneumatic Swing-Out Platform (Radio Valves)


The elevated manual control platform at the rear of the ULTRA STONE SLINGER™ gives the operator a clear view of the work area.
The versatile radio control system increases the Operator’s ability to precisely deliver the Materials with pin point accuracy.