Capacity: 26 Tons / 18 3/4 Cubic Yards

Net Weight: 9,800 lbs / 4,445 kg.

Construction:
• 11-guage abrasion resistant steel hopper
• 1/4"-11 gauge formed channel reinforcing
• 6 heating rails ( 3 per side)
• Five 12"x 35" hydraulic-operated gates

Main Conveyor:
• 18"x 22' c/w 35° troughed idlers
• Endless hot vulcanized belt
• Variable speed (0-800 f.p.m.)
• Hydraulic motor drive

Rear Conveyor:
• 14" x 19' c/w 35° troughed idlers
• Endless hot vulcanized belt
• Variable speed (0-2600 rpm)
• Hydraulic motor drive
• Full hydraulic lift, swing and rotate
• Left or right fender conveyor travel positions
• Chevron Belt (optional)

Control Systems:
• Manual lever operated directional control valves at ground level (Standard)
• High Mounted platform and valves(optional)
• Dual location valve package (optional)
• Radio Remote control valves (optional)

Dimensions:
• Body 8'-6" x 20' x 6'-10" high plus 6" wood (White Oak) box extensions plus 12" arched tarp system for an overall height on the chassis frame rails of 8'-4"
• Overall lenght with the conveyor parked on the fender is 24'-6".

Recommended Truck:
• Heavy construction chassis
• 20,000 lb. Front / 46,000 lb. rears
• C/A dimension range 168" to 200" dependent on state/provincial laws
• Consult your distributor and truck dealer for specifications and auxilliary axle requirements

Pump:
• Cast iron, gear type, direct mount to PTO
• Tandem cast iron, gear type (optional)
• Crankshaft driven, gear type (optional)

Power Take Off (PTO): Air Shift

Oil Cooler:
• 12 Volt DC fan, air cooled
• Single fan (standard)
• Dual fan (Optional)

Vibrator: Hydraulic

Lighting: Sealed Bulb

Accessories:
• Super Shield
• Electronic Engine Throttle control
• 12V DC powered trap drive
• 18 inch arched tarp
• Custom color paint
• Top Soil Attachment
• Road Shouldering attachment